|
|
Item Posts
Sort Order
|
|
|
|
Electric power steering swap
|
JoeM2
New User
| Posts: 1
| Joined: 03/11
Posted: 03/15/11
02:30 PM
|
|
Hi,
I'm thinking of putting an EPS unit from a 07 HHR into a 1955 Willys. The PSCM on the unit has 4 wires that are for serial data. Two go to the BCM, two to the DLC. Is there a way to bypass the need for this input. If not, can I create something that will give an input that will allow the EPS to work.(ie. create a false signal) The Willys will be used off road and at low speed, so a higher torque setting would be desirable.
Thanks
|
|
|
|
|
Posted: 03/21/11
11:25 AM
|
|
Nice! I've been fantasizing about doing one of these kits:
http://www.flamingriver.com/index.php/products/c0018/s0001
But obviously it can be pretty cost prohibitive. I'd imagine you can pickup one in a junk yard pretty cheap from an HHR, Cobalt, Vue, G5/G6, etc as you have. Let us know if you get this figured out!
|
|
|
|
|
|
|
|
|